(module UKZ1H471MHM (layer F.Cu) (tedit 5D5D7139)
  (fp_text reference REF** (at -3.7465 0) (layer F.SilkS)
    (effects (font (size 1 1) (thickness 0.15)))
  )
  (fp_text value U1-II (at -3.7465 0) (layer F.SilkS)
    (effects (font (size 1 1) (thickness 0.15)))
  )
  (fp_text user "Copyright 2016 Accelerated Designs. All rights reserved." (at 0 0) (layer Cmts.User)
    (effects (font (size 0.127 0.127) (thickness 0.002)))
  )
  (fp_text user * (at 0 0) (layer F.SilkS)
    (effects (font (size 1 1) (thickness 0.15)))
  )
  (fp_text user * (at 0 0) (layer F.Fab)
    (effects (font (size 1 1) (thickness 0.15)))
  )
  (fp_line (start -13.2715 0) (end -12.0015 0) (layer F.Fab) (width 0.1524))
  (fp_line (start -12.6365 -0.635) (end -12.6365 0.635) (layer F.Fab) (width 0.1524))
  (fp_line (start -13.2715 0) (end -12.0015 0) (layer F.SilkS) (width 0.1524))
  (fp_line (start -12.6365 -0.635) (end -12.6365 0.635) (layer F.SilkS) (width 0.1524))
  (fp_line (start -7.145617 -8.255) (end -0.347383 -8.255) (layer F.CrtYd) (width 0.1524))
  (fp_line (start -0.347383 -8.255) (end 4.5085 -3.399117) (layer F.CrtYd) (width 0.1524))
  (fp_line (start 4.5085 -3.399117) (end 4.5085 3.399117) (layer F.CrtYd) (width 0.1524))
  (fp_line (start 4.5085 3.399117) (end -0.347383 8.255) (layer F.CrtYd) (width 0.1524))
  (fp_line (start -0.347383 8.255) (end -7.145617 8.255) (layer F.CrtYd) (width 0.1524))
  (fp_line (start -7.145617 8.255) (end -12.0015 3.399117) (layer F.CrtYd) (width 0.1524))
  (fp_line (start -12.0015 3.399117) (end -12.0015 -3.399117) (layer F.CrtYd) (width 0.1524))
  (fp_line (start -12.0015 -3.399117) (end -7.145617 -8.255) (layer F.CrtYd) (width 0.1524))
  (fp_circle (center -3.7465 0) (end 4.2545 0) (layer F.Fab) (width 0.1524))
  (fp_circle (center -3.7465 0) (end 4.3815 0) (layer F.SilkS) (width 0.1524))
  (pad 1 thru_hole rect (at -7.493 0) (size 1.5748 1.5748) (drill 1.0668) (layers *.Cu *.Mask))
  (pad 2 thru_hole circle (at 0 0) (size 1.5748 1.5748) (drill 1.0668) (layers *.Cu *.Mask))
  (model ${KIPRJMOD}/kicadlib/model/470.step
    (offset (xyz -7.5 0 0))
    (scale (xyz 1 1 1))
    (rotate (xyz 0 0 0))
  )
)