| 1 | # dmesg |
| 2 | OpenBSD 6.0-current (GENERIC) #29: Sun Jan 22 23:05:55 MST 2017 |
| 3 | build@armv7.openbsd.org:/usr/src/sys/arch/armv7/compile/GENERIC |
| 4 | real mem = 536870912 (512MB) |
| 5 | avail mem = 517779456 (493MB) |
| 6 | mainbus0 at root: TI AM335x BeagleBone Black |
| 7 | cpu0 at mainbus0: ARM Cortex A8 R3 rev 2 (ARMv7 core) |
| 8 | cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled |
| 9 | cpu0: 32KB(64b/l,4way) I-cache, 32KB(64b/l,4way) wr-back D-cache |
| 10 | omap0 at mainbus0 |
| 11 | prcm0 at omap0 rev 0.2 |
| 12 | omap0: device edma unit 0 not configured |
| 13 | dmtimer0 at omap0 rev 3.1 |
| 14 | dmtimer1 at omap0 rev 3.1 |
| 15 | simplebus0 at mainbus0: "ocp" |
| 16 | simplebus1 at simplebus0: "l4_wkup" |
| 17 | simplebus2 at simplebus1: "scm" |
| 18 | ompinmux0 at simplebus2 |
| 19 | intc0 at simplebus0 rev 5.0 |
| 20 | omgpio0 at simplebus0: rev 0.1 |
| 21 | gpio0 at omgpio0: 32 pins |
| 22 | omgpio1 at simplebus0: rev 0.1 |
| 23 | gpio1 at omgpio1: 32 pins |
| 24 | omgpio2 at simplebus0: rev 0.1 |
| 25 | gpio2 at omgpio2: 32 pins |
| 26 | omgpio3 at simplebus0: rev 0.1 |
| 27 | gpio3 at omgpio3: 32 pins |
| 28 | com0 at simplebus0: ti16750, 64 byte fifo |
| 29 | com0: console |
| 30 | tiiic0 at simplebus0 rev 0.11 |
| 31 | iic0 at tiiic0 |
| 32 | "ti,tps65217" at iic0 addr 0x24 not configured |
| 33 | "at,24c256" at iic0 addr 0x50 not configured |
| 34 | "nxp,tda998x" at iic0 addr 0x70 not configured |
| 35 | tiiic1 at simplebus0 rev 0.11 |
| 36 | iic1 at tiiic1 |
| 37 | "at,24c256" at iic1 addr 0x54 not configured |
| 38 | "at,24c256" at iic1 addr 0x55 not configured |
| 39 | "at,24c256" at iic1 addr 0x56 not configured |
| 40 | "at,24c256" at iic1 addr 0x57 not configured |
| 41 | ommmc0 at simplebus0 |
| 42 | sdmmc0 at ommmc0: 4-bit, sd high-speed, mmc high-speed |
| 43 | ommmc1 at simplebus0 |
| 44 | sdmmc1 at ommmc1: 1-bit |
| 45 | omdog0 at simplebus0 rev 0.1 |
| 46 | cpsw0 at simplebus0: version 1.12 (0), address 80:30:dc:5e:b0:82 |
| 47 | ukphy0 at cpsw0 phy 0: Generic IEEE 802.3u media interface, rev. 1: OUI 0x0001f0, model 0x000f |
| 48 | scsibus0 at sdmmc0: 2 targets, initiator 0 |
| 49 | sd0 at scsibus0 targ 1 lun 0: <Sandisk, SA08G, 0014> SCSI2 0/direct removable |
| 50 | sd0: 7388MB, 512 bytes/sector, 15130624 sectors |
| 51 | scsibus1 at sdmmc1: 2 targets, initiator 0 |
| 52 | sd1 at scsibus1 targ 1 lun 0: <Kingston, S10004, 0000> SCSI2 0/direct removable |
| 53 | sd1: 3648MB, 512 bytes/sector, 7471104 sectors |
| 54 | vscsi0 at root |
| 55 | scsibus2 at vscsi0: 256 targets |
| 56 | softraid0 at root |
| 57 | scsibus3 at softraid0: 256 targets |
| 58 | boot device: sd0 |
| 59 | root on sd0a (df2b5ffe4a7cbf2c.a) swap on sd0b dump on sd0b |
| 60 | WARNING: CHECK AND RESET THE DATE! |
| 61 | |